Alternative to rare earth lithium-ion batteries

[Guest PNNL]

A redesign of sodium-nickel chloride batteries promises to overcome some of the obstacles long associated with rechargeable batteries. Replacing their typical cylindrical shape with a flat disc design allows the battery to deliver 30 percent more power at lower temperatures, according to work published by the Department of Energy's Pacific Northwest National Laboratory in the October 8 issue of ECS Transactions, a trade journal. Researchers say these sodium-beta batteries could eventually be used in electricity substations to balance the generation and delivery of wind and solar power on to the grid.

 

Because the battery's main components include abundant materials such as alumina, sodium chloride and nickel, they are less expensive to manufacture than lithium-ion batteries, and could still offer the performance necessary to compete for consumers' interest. In addition, compared to other battery systems, sodium-beta batteries are safer and can help incorporate renewable energy sources into the electrical system easier.

 

"This planar sodium battery technology shows potential as an option for integrating more solar and wind power into our electric grid," said Carl Imhoff, electricity infrastructure sector manager at PNNL.

 

Sodium-beta alumina batteries have been around since the 1960s but their tubular, cylindrical shape does not allow efficient discharge of stored electrochemical energy. This inefficiency causes technical issues associated with operating at high temperatures and raises concern about the cost-effectiveness of the tubular batteries.

 

Lithium-ion batteries surpassed sodium-beta batteries because they perform better. However, materials for lithium batteries are limited, making them more expensive to produce. Safety also has been a concern for rechargeable lithium batteries because they can be prone to thermal runaway, a condition where the battery continually heats up until it catches fire.

 

"The PNNL planar battery's flat and thin design has many advantages over traditional, tubular sodium nickel chloride batteries," said PNNL Scientist Xiaochuan Lu, co-author of the paper.

 

To take advantage of inexpensive materials, the PNNL researchers thought a redesign of the sodium-beta batteries might overcome the technical and cost issues: the cylindrical sodium beta batteries contain a thick, solid electrolyte and cathode that create considerable resistance when the sodium ion travels back and forth between the anode and the cathode while the battery is in use. This resistance reduces the amount of power produced. To lower the resistance, temperature must be elevated. But increasing operation temperature will shorten the battery's lifespan.

 

The researchers then tested the performance of their redesigned sodium-nickel chloride planar batteries, which look like wafers or large buttons.

 

The researchers found that a planar design allows for a thinner cathode and a larger surface area for a given cell volume. Because the ions can flow in a larger area and shorter pathway, they experience lower resistance. Next, the battery's design incorporates a thin layer of solid electrolytes, which also lowers the resistance. Because of the decrease of resistance, the battery can afford to be operated at a lower temperature while maintaining a power output 30% more than a similar-sized battery with a cylindrical design.

 

Finally, the battery's flat components can easily be stacked in a way that produces a much more compact battery, making it an attractive option for large-scale energy storage, such as on the electrical grid.

 

"Our goal is to get a safer, more affordable battery into the market for energy storage. This development in battery technology gets us one step closer," said Lu.

 

Researchers at PNNL and EaglePicher LLC received funding from the Advanced Research Projects Agency — Energy, or ARPA-E, earlier this year to conduct the research, and will work together to improve the battery's design, lifespan and power capacity.

 

The research was funded by PNNL and by ARPA-E.

[Guest ARPA-E]

The U.S. Department of Energy announced today that it will hold the second annual ARPA-E Energy Innovation Summit February 28 - March 2, 2011 at the Gaylord Convention Center just outside Washington, D.C. The event, which will unite key players from all sectors of the nation’s energy innovation community to share ideas for developing and deploying the next generation of clean energy technologies, is being co-hosted by the Department’s Advanced Research Projects Agency – Energy (ARPA-E) and Clean Technology and Sustainable Industries Organization (CTSI), with support from the National Venture Capital Association (NVCA) and the Kauffman Foundation.

 

“After such a successful first Summit, I’m excited to again bring our nation’s brightest minds to Washington to discuss solutions to our energy challenges,” said Secretary Chu. “This unique forum will help facilitate the partnerships necessary to bring game-changing technologies to market quickly, which is critical to securing America’s global technology leadership and creating new jobs.”

 

The event will feature a technology showcase with more than 100 exhibits from ARPA-E-funded projects in areas such as grid-scale storage, power electronics, batteries for electric vehicles, building efficiency, advanced carbon capture, and electrofuels. The showcase will also feature many promising projects that submitted proposals but that ARPA-E was unable to fund. ARPA-E also will host a pre-conference workshop to provide insight into new program areas and to allow participants to collaborate on solutions to energy challenges.

 

The inaugural ARPA-E Energy Innovation Summit, held in March 2010, attracted more than 1,700 attendees from 49 states and 16 countries. Attendees included members of research and development institutions, global corporations, technology entrepreneurs, investors, policymakers and government officials. More than 50% of attendees were high level executives.

 

U.S. Secretary of Energy Steven Chu, ARPA-E Director Arun Majumdar, and many other industry leaders will be featured speakers at the event.

 

To learn more about the 2011 ARPA-E Energy Innovation Summit, please visit: http://www.ct-si.org/events/EnergyInnovation/.